Trim Parts USA manufactures GM licensed reproduction trim parts like molding and emblems for classic Chevy cars and trucks. They use the original tooling from GM in all the parts that have tooling available. You will find all the Trim Parts USA parts you need to add the finishing touches to your classic Chevy below. And remember, don't hesitate to call us at 479-787-5575 or submit an inquiry with any question that you might have, technical or otherwise. We're not just here to take your order, we're classic car and truck enthusiasts too!
When restoring your classic Chevy, you may want your dash to look as complete or as authentic as possible. By installing OEM Impala clock parts, you get a look that resembles the day your...More Details »
They don't make things like they used to! Everyone knows that saying and also knows that it has a lot of merit! Cars and trucks especially were built better in the old days. They were built...More Details »
As you restore your classic Chevy truck, you want everything on it to look like it did the day it rolled off the factory floor and into the showroom. This means that all of the emblems need to be...More Details »
As you restore your classic Chevy truck, you want everything on it to look like it did the day it rolled off the factory floor and into the showroom. This means that all of the emblems need to be...More Details »
Description: 1961-1962 Impala or Belair or Biscayne
Condition: New
Limited Supply: Only 3 Left!
Price: $48.95
Tilt Release LeverNew
1967 Impala or Caprice or Bel-Air or Biscayne with Tilt 1967 Chevelle or Malibu or El Camino with Tilt 1967 Nova or Chevy II with Tilt 1967 Camaro With Tilt
Description: 1967 Impala or Caprice or Bel-Air or Biscayne with Tilt 1967 Chevelle or Malibu or El Camino with Tilt 1967 Nova or Chevy II with Tilt 1967 Camaro With Tilt
Condition: New
Limited Supply: Only 2 Left!
Price: $30.95
Tilt Release LeverNew
1968-1970 Impala or Caprice or Bel-Air or Biscayne with Tilt 1968-1970 Chevelle or Malibu or El Camino with Tilt 1968-1970 Nova or Chevy II with Tilt 1968-1970 Camaro With Tilt
Description: 1968-1970 Impala or Caprice or Bel-Air or Biscayne with Tilt 1968-1970 Chevelle or Malibu or El Camino with Tilt 1968-1970 Nova or Chevy II with Tilt 1968-1970 Camaro With Tilt
Condition: New
Limited Supply: Only 2 Left!
Price: $30.95
Tilt Release LeverNew
1971-1972 Chevelle or Malibu or El Camino with Tilt 1971-1974 Nova or Chevy II with Tilt 1971-1978 Camaro With Tilt
Since Trim Parts USA has been licensed to use the original tooling from GM, they are able to present a product that has been created to meet the original manufacturer’s part standards. When there is original tooling unavailable, Trim Parts USA engineers design their own tooling that meets the original GM guidelines. At H&H Classic, we carry the Trim Parts USA parts that have been created to help you finish your classic Chevy car or truck. It is more than door moldings that help to finish your car. You will find emblems, lens, bezels, air conditioning control parts and other trim pieces that have been reproduced to the highest standards. Since their slogan is “When Quality Counts”, you know you are using a part that is specifically created to ensure a secure fit. Their parts are hand-assembled and each piece is inspected to ensure that it is of the best quality available. Trim Parts USA products carry a full guarantee against defects during manufacturing. Whether you are adding a new backup light lens, an air cleaner emblem or side bed emblems, you will find that Trim Parts USA really mean it when they say that quality counts.
