H&H Classic Parts - Vintage Air SureFit Conversion Units

This Gen IV SureFit™ control panel kit is designed to bolt into the OEM dash location and work directly with the Gen IV SureFit™ evaporator system for your vehicle.

The kit includes:

• A replacement control panel designed to bolt directly into your OEM dash
• Wiring harness
• Detailed installation instructions

This Control Panel only works with Vintage Air Gen IV SureFit Kits, it will not work with factory AC or any other brand of AC system.

This Gen IV SureFit™ control panel kit is designed to bolt into the OEM dash location and work directly with the Gen IV SureFit™ evaporator system for your vehicle.

The kit includes:

• A replacement control panel designed to bolt directly into your OEM dash
• Wiring harness
• Detailed installation instructions

This Control Panel only works with Vintage Air Gen IV SureFit Kits, it will not work with factory AC or any other brand of AC system.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-78 Camaro without Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-78 Camaro with Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1979-81 Camaro without Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1979-81 Camaro with Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro without Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro with Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro without Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
Infinite just-right-temperature air blending
Infinite blower fan speed adjustment
High-volume dehumidified defrost mode
Separate high-capacity aluminum plate & fin cooling coil
Copper/brass CuproBraze parallel-flow heater coil
Mounts behind the dash
Uses your factory system controls with our patented Electronic Cable Converters
Flat steel firewall cover panel
Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro with Factory AC. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-73 Camaro without Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1979-81 Camaro without Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro without Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-73 Camaro with Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1979-81 Camaro with Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro with Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-73 Camaro with Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1979-81 Camaro with Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro with Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-73 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1979-81 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-73 Camaro with Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1979-81 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro with Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro without Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1974-77 Camaro with Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro without Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro without Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro without Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1974-77 Camaro with Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro without Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro without Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1974-77 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro without Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro without Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1974-77 Camaro with Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro with Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro with Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1974-77 Camaro with Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro with Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro with Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1974-77 Camaro with Factory AC with Small Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1974-77 Camaro with Factory AC with Big Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1969 Camaro with Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1978 Camaro with Factory AC with Big Block with Long Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

Uses your factory system controls with our patented Electronic Cable Converters

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1967-68 Camaro without Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

• Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
• Infinite just-right-temperature air blending
• Infinite blower fan speed adjustment
• High-volume dehumidified defrost mode
• Separate high-capacity aluminum plate & fin cooling coil
• Copper/brass CuproBraze parallel-flow heater coil
• Mounts behind the dash
• Uses your factory system controls with our patented Electronic Cable Converters
• Flat steel firewall cover panel
• Replacement molded glove box (reduced capacity)

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.

Additional features include variable blower speed and dash/floor/defrost blend.

Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

Some installations may require additional engine pulleys not included with kits. You must provide pulleys belts, heater hose, and refrigerant. Vintage Air recommends using their heavy duty fan blade and a fan shroud.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

Copper/brass CuproBraze parallel-flow heater coil

Mounts behind the dash

New electronic control panel included

Flat steel firewall cover panel

Replacement molded glove box (reduced capacity)

This kit was designed for the 1970-73 Camaro without Factory AC with Small Block with Short Water Pump. This kit may also fit other vehicles from the same time period. To verify fitment or to ask a question, feel free to contact us.