Front Power Disc Brake Conversion Kit

This is kit is a complete of a disc brake kit as you can get. Designed to work with 1955 Belair, 210, or 150 cars still using the stock height spindles. The only item you will need is brake fluid. Work with stock 15" Wheels or any size wheel bigger. Just need to make sure the back spacing is correct for disc brakes.

Each Kit Comes with the following:

• 11" Rotors
• Loaded Large GM Single Piston Calipers
• Caliper Brackets
• Rubber Brake Hoses with Banjo Bolts
• Bearings, Seals, Dust Caps
• Spindle Nuts, Spindle Washers
• All Hardware
• 8" Dual Diaphram Booster with Master Cylinder & Mounting Bracket
• GM Style Proportioning Valve with Mounting Bracket
• Complete Pre-Bent Line Kit

Watch Tray and Herman Smith of H&H Classic Parts join the hosts of Motorhead Garage to install disc brakes on a Tri-Five: