4-Wheel Manual Disc Brake Conversion Kit

This is kit is a complete of a disc brake kit as you can get. Designed to work with 1955 Belair, 210, or 150 cars still using the stock height spindles and Stock Rear End. The only item you will need is brake fluid. Work with stock 15" Wheels or any size wheel bigger. Just need to make sure the back spacing is correct for disc brakes.

Each Kit Comes with the following:

• Front 11" Rotors
• Rear Rotors
• Front Loaded Large GM Single Piston Calipers
• Rear Loaded GM Single Piston Calipers with E-Brake
• Front and Rear Caliper Brackets
• Rubber Brake Hoses with Banjo Bolts
• Bearings, Seals, Dust Caps
• Spindle Nuts, Spindle Washers
• All Hardware
• Dual Master Cylinder
• GM Style Proportioning Valve with Mounting Bracket
• Rear Brake Cables
• Complete Pre-Bent Line Kit
• Pre-Bent Brake Lines over the Rear End

Watch Tray and Herman Smith of H&H Classic Parts join the hosts of Motorhead Garage to install disc brakes on a Tri-Five: