Classic Instrument Gauge Kit (G-Stock)

The updated cluster will include a speedometer, tachometer, fuel level, temperature, oil pressure, and volt gauges; along with indicator lights.  All the gauges are electronic operation.  One unique feature is that the fuel gauge is programmable for any ohm range with a selector switch on the back of the cluster.  This means the fuel gauge will work with the stock sending unit (0-90 ohm), any other factory sending units, or any Classic Instruments fuel sending unit.  The standard sending unit kit will be SNGMNF.

The cluster was designed with factory fitment and installation in mind.  The cluster mounts in the original factory bezel and uses the original diffuser plate, both of which will need to be re-used from the original cluster.  A new, laser-cut plastic lens is provided with the cluster.  Wiring for the cluster is handled with a single wire harness connection on the back of the cluster.  Additionally, there is a separate connection and harness for an external shift light on the back of the cluster. 

Features of this cluster are:

• LED lighting
• Green turn signal indicators
• Red LED warning light
• Separate power (12V) and Ground leads in the wire harness
• Blue High Beam indicator
• Molded plastic back housing
• One single snap in wire harness on the back, SNZST16, for the cluster wiring
• Zeus Speedometer Technology built-in
• Push button speedometer calibration

Does not include Gauge Bezel